Reverse Osmosis Spares
RO Spares & Accessories
Reverse Osmosis Membrane Housing.
Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.
Inlet, Permeate and Waste are all 1/8" Female Thread.
We recommend using the one-way check valve on the permeate to prevent reverse flow.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.
Automatically shuts off the water supply when the tank pressure (or permeate pressure) reaches ~65% of the incoming line pressure.
Without a shut-off block (or solenoid in case of RO with pump) the RO would be wasting water permanently even when the tank is full.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Fits both 15mm and 22mm copper pipes.
*actual product may differ slightly to image.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Used to neatly insert RO 1/4" waste water tubing line into a drain pipe.
Used in domestic 50GPD reverse osmosis systems.
- Diaphragm Pump.
JACO 3/8" to 1/4" RO Pipe Fittings included.
Pump only. Transformer not included.
- Constant pressure invention design.
- Extend the life of RO membrane.
- Solution for water pressure fluctuation problem.
- Suitable pipe pressure 10-50 psi.
- No influence from climate and temperature.
- No decompression.
- No water leakage problem.
- Stable current makes transformer's life longer than other booster pump.
- Constant pressure technology to ensure stable pressure work on RO membrane.
Material: Cast Iron, EPDM, Santoprene, Nylon
Function: Booster Pump
Performance: No Leak
Flow: 1.6L/M @70psi
Outlet Pressure: Constant @ 70psi
Port: 3/8" FTP
Certificate: Ce, RoHS
Trademark: E-CHEN
Origin: China
Power: Electric
Liquid Media: Water
RO Capacity: 100-200 GPD
Inlet Pressure: 10psi - 50psi
Voltage: 24VDC
Adapter: 3A (Included)
Patent Product: Yes
Specification: 210x104x99mm, 2.2kg
Used to power RO Booster pumps and solenoids in domestic RO systems.
*May differ slightly to image due to multiple suppliers, some have connectors and some have only wires.
Used in under-counter RO systems.
- xxxML / minute restriction under normal conditions.
- 1/4" Female fittings.
Used in domestic 50GPD or 100GPD reverse osmosis systems.
- Diaphragm Pump.
- Pump and Transformer Included.
Standard female 3/8" Inlet and Outlet.
Voltage: 24V DC
Current: 0.42A, (0.6A Max)
Open Flow: 58LPH (15.3GPH)
Medium: Water
Inlet Pressure: 0.2 MPa (29PSI) Min: 0.05 MPa (7.3PSI) Max: 0.4 MPa (58PSI).
Working Pressure: 0.56MPa (81PSI)
Working Flow: 28LPH (6.9GPH)
Bypass Pressure: 0.70MPa (100PSI) - 0.86MPa (125PSI) MAX
Temperature: 25C
Caution: Motor duty cycle will vary with load and ambient temperature.
Used in domestic RO systems.
Solenoid Valve 24V DC Normally Closed.
We have multiple suppliers for these, we have both types as shown in the pictures, one with terminals one with just raw wires. If you want a specific one please notify us in your order comments.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Used in under-counter RO systems.
- 400ML / minute restriction under normal conditions.
- 1/4" Female fittings.
- Ball Valve built in for manual flushing.
This system works with any 10" Single, Dual or Triple Stage Under-Counter Filtration System or RO (Reverse Osmosis) System.
Standard 1/4" Inlet and Outlet.
The leaked-water accumulates in the holding tray and triggers shutoff of the supply.
*Does not include the RO system shown in the image.
Empty In-Line Housing with 1/4" Female Threads.
Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...
Uses a rubber o-ring seal. Includes 2 sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.
Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Reverse Osmosis Membrane Housing.
Fits 300GPD membranes.
We recommend using the one-way check valve on the permeate to prevent reverse flow.
*Product may differ slightly to image.
- 1